Capacitive Interactive Touch Screen – XXZN-X Series

Product Introduction

1. 4K ultra-high-definition display, zero-fit design, ultra-thin design
2. Built-in intelligent core and operating system
3. The system can be equipped with plug-in PC modules.
4. Touch technology:

(1) High-precision capacitive touch

(2) The touch algorithm is highly optimized, the response speed is fast, and the writing and presentation are smooth.

5. Integrated display, touch control and intelligent core

(1) High-definition image processing engine

(2) Smart display chip, smart Android 11 operating system, 4K UI display, 4K whiteboard;

(3) Any channel can be used to write annotations

6. In standby mode, HDMI channel signal input intelligent wake-up
7. Support WIFI dual-band 2.4G/5G (WIFI 6)
8. HDMI supports 4K 60Hz
9. With channel memory function, the machine will enter the home page by default when powered on , and it has the function of customizing the channel naming
10. One-click black screen (energy saving, environmental protection, and increased service life)
11. Front USB 3.0 port with channel switching, TYPE-C port
12. Support intelligent light sensing to adjust backlight;
13. Support wired network (Android, PC)
14. Appearance of the whole machine (iron gray on the top and bottom, black on the left and right

Technical parameters

Notes

1. Please read these precautions carefully before operating or using the product.
2. All warning signs on the product and in the product instructions should be followed.
3. The button on the panel is a unipolar switch. When the power is on, press this button to switch between the power on and standby modes. The machine itself is equipped with an omnipolar switch, which is used as a device to disconnect the power supply.
4. When any abnormal sound or smell occurs in the machine, please turn off the power immediately and unplug it. If it is confirmed to be abnormal, do not continue to use it and ask the product maintenance personnel to repair it.
5. If the machine is not to be used for a long time, turn off the machine and unplug the power plug.
6. Inflammable and explosive materials, candles, electric stoves, light bulbs, etc. must not be placed on or near the machine to avoid accidents.
7. Be careful not to let liquid or metal enter the machine. If liquid or metal falls into the machine, do not turn it on and ask a professional to handle it as soon as possible.
8. Do not wipe the machine with chemical reagents. Solvents may deteriorate the casing and damage its painted surface. If there is dust and dirt, turn off the machine for ten minutes and wipe it with a damp cloth. The display can be gently wiped with a clean soft cloth. Before cleaning, unplug the machine from the wall outlet. Do not use liquid detergents or aerosol cleaners.
9. Be careful about water and moisture. Do not use this product near or near water, such as in a bathtub, wash basin, kitchen, sink, laundry tub, wet basement or swimming pool.
10. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
11. The plug should be easily pluggable and grounded. This product is equipped with a three-wire grounding plug, which has a grounding pin and can only be plugged into a grounding power outlet.
12. Do not place this product on an unstable cart, stand, tripod, bracket or table, as this may cause the product to tip over. When this product is placed on a cart, be careful when moving it. Quick stops, excessive force or uneven surfaces may cause the cart and the product to tip over.
13. The slots and openings on the equipment are used for ventilation to ensure reliable operation of the product and prevent overheating. The ventilation holes should not be covered with items such as newspapers, tablecloths and curtains that would hinder ventilation. For adequate ventilation, a certain amount of clearance should be ensured around the product.
14. This product can only be powered by the power type and power voltage indicated on the label. If you are unsure about the power type and voltage at home, please contact the product dealer or local power company.
15. The power cable in the accessories of this product is a three-pin power cable (with grounding protection). Please make sure that the grounding terminal of the wall socket is well grounded during installation. When wiring the power cable, avoid passages to prevent it from being stepped on by people and from being squeezed by other objects.
16. Do not push objects of any kind into this product through any opening as they may touch dangerous voltage points or protruding parts that could result in fire or electric shock.
17. Do not repair this product without authorization. Opening or removing the cover without authorization may expose you to dangerous voltage or other dangers. If you have any repair issues, please contact the manufacturer’s designated maintenance personnel.
18. This product should be installed in accordance with the manufacturer’s operating instructions and only installation accessories recommended by the manufacturer should be used.
19. The wall mounting (if any) of this product is only suitable for normal cement walls, solid walls, and wooden walls that can bear more than 3 times the weight of the machine. For hanging or hoisting on special walls (steel structure walls, hollow structure walls, glass, marble, etc.), the manufacturer recommends that you must consider the safety of the product hanging or hoisting, and only operate after ensuring that it is correct. The installation of such special materials must be carried out by professionals, and the manufacturer does not assume the obligation of such installation.
20. The important information with the exclamation mark on the rear nameplate means: If it is necessary to replace important safety components during maintenance (components with this mark next to the components on the circuit board), they must only be replaced with components specified in the safety test documents. If there are no identical replacement components, please ask the manufacturer for them.
21. The protective grounding of accessible conductive parts and output sockets of Class I equipment should be reliably connected to the protective grounding terminal in the equipment.
22. Do not cover the ventilation holes of this device with anything, such as tablecloths, dining cloth, curtains, etc.
23. Do not place any burning objects (with flames), such as burning candles, on the machine.
24. When you move the device from a hot place to a cold place, turn it on and allow it to warm up fully before operation.
25. In any situation where batteries may be used, there is a risk of explosion if the batteries are improperly replaced. They should only be replaced with batteries of the same or equivalent type. Batteries (battery packs or battery combinations) must not be exposed to excessive heat such as sunlight, fire or similar environments.
26. The disconnect device of this product is an appliance coupler, which is located on the product casing. When this product is not in use, please unplug the power cord through the appliance coupler. Do not place other objects near the appliance coupler to avoid hindering the disconnection of this product from the power supply.
27. Please make sure that the device is installed in a suitable location, such as on a wall or hung on a mobile stand. The mobile stand uses the specifications and models recommended or specified by the manufacturer and must be installed under the guidance of a professional.
28. Due to the influence of product configuration and manufacturing process, the actual body size/body weight and outer packaging may be different. Please refer to the actual product. The product pictures in this specification are for illustration only. The actual product effects (including but not limited to appearance, color, size, weight) may be slightly different. Please refer to the actual product. In order to provide as accurate specifications as possible, the text description, picture effects and other contents of this specification may be adjusted and revised in real time to match the actual product performance, specifications and other information.        

Sensor Types

①Infrared type

Infrared touch is the most widely used and mature touch solution. Its disadvantages are also obvious. It is more susceptible to interference from the remote control and has a slight delay in control. The color gamut of the infrared screen is generally 72%-90%, and the image quality is good.

②Capacitive type

Capacitive touch uses the micro-current induction of the human body to work. Its advantages are multi-touch, sensitive response, smooth writing, and effective prevention of false touch interference. The color gamut of the capacitive screen is 100%, and the picture quality is full.

③Electromagnetic type

It is responsive and accurate, but has certain limitations. It must rely on an electromagnetic pen for operation and is often more expensive.